Thema geschlossen
Seite 1 von 3 1 2 3 LetzteLetzte
Ergebnis 1 bis 10 von 23

Thema: Der "ewige Anfänger" - oder, wie man einen Troll "erlegt"

  1. #1
    mischu62
    Gast

    Standard Der "ewige Anfänger" - oder, wie man einen Troll "erlegt"

    Hallo,

    nachdem ich mich durch die vielen Treads und posts gelesen habe fühle ich mich von der Informations-vielfalt erschlagen und verwirrt,sodas ich mich als neuling nun garnicht an die sache rangetraue,zumal ich bisher keinen blassen Schimmer von der Wlan-materie unter Linux habe.

    In meinem Acer Aspire 7520 Notbook ist laut hwinfo ein

    Atheros AR242x802.11abg wireless PCI Express Adapter verbaut (rev1)
    als unique ID wird angegeben: qnJ-.iXEd68VX613

    nun habe ich die befürchtung,das dieser zu den nicht von Madwifi unterstützten Chips gehöhrt.
    Kann mir bitte jemand bei der einrichtung dieses teiles helfen?Wie gesagt,das ist alles noch totales Neuland für mich und etwas zu komplex für den Anfang.

    Gruß
    micha

  2. #2
    Moderator Avatar von benne
    Registriert seit
    09.05.2006
    Beiträge
    365

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Hallo micha,

    das Wlan-Kompendium hast du dir aber schon durchgelesen, oder? Zumindest den Post für Atheros-Karten (Tipp: Post Nr. 7), zumal dir das Kompendium ja schon mal als Hilfe vorgeschlagen worden ist.
    Dann hast du doch bestimmt auch die Sachen versucht, die da beschrieben sind.
    Dann kannst du uns ruhig verraten, was du da gemacht hast, an welcher Stelle du nicht weiterkamst, was genau du nicht verstanden hast, ...
    Und dann helfen wir auch gerne weiter.

    Schönen Gruß,
    benne
    Jabber:
    benne_@jabber.ccc.de

    Der pc-forum24.de Chat:
    #pc-forum24.de im QuakeNet!
    pc-forum24.de@conference.jabber.ccc.de

  3. #3
    mischu62
    Gast

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Hallo Benne,

    ja habe mir das kompendium dazu durchgelesen und auch den post 7 dazu.Aber anscheinend bin ich wirklich zu dumm für linux-ich arbeite normalerweise nicht mit der konsole weil ich nicht die zeit habe mich noch so intensiv damit zu bechäftigen im moment.
    Ich verstehe das ganze nicht,bzw.bin so nicht in der lage,das was in dem Kompendium beschrieben wird einfach so nachzuvollziehen,leider,mir fehlt da der entscheidende stein der ins rollen kommt.
    Außerdem wollt ich den Laptop für mein liebes frauchen mit dem neuen suse 11 einrichten-der bleibt so wie er ist,sie nutzt nur ihre kleinen spiele,ein paar briefchen und email und hat ein stabiles system mit wlan für draußen ... hm,das mit dem Wlan kann ich dann wohl stecken lassen ... das schaff ich so nicht.
    Trotzdem danke,das du wenigstens geantwortet hast ! (ich selber nutze win server 2008 datacenter und bin voll zufrieden damit,weil schnell und stabil-es hat eben jeder so seine meinungen zu gewissen BS )

    Gruß
    Micha
    Geändert von mischu62 (18.10.2008 um 18:54 Uhr)

  4. #4
    cal
    cal ist offline
    Lehrling Avatar von cal
    Registriert seit
    17.03.2007
    Ort
    nahe Landau in der Pfalz
    Beiträge
    213

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Hallo,
    wenn du statt irgendwelchem Gefasel ein paar Infos posten würdest könnte dir weitergeholfen werden.
    Bei meinem Frauchen läuft der Chip zumindest prima, wie du hier sehen kannst.
    http://www.pc-forum24.de/26008-post21.html

    Woran das wohl liegt?

    Es gibt sogar gleich zwei Treiber mit denen er funktioniert.

    Der andere ist der neueste madwifi hier aus der Downloadsektion.
    Aber das solltest du eigentlich schon alles selbst gelesen haben.

    Also: Wo hakts?

    Und schreib mal etwas strukturierter damit mans auch lesen kann ohne einen Knoten ins Hirn zu kriegen.

    Von irgendwelcher Zensur hab ich hier eigentlich noch nix bemerkt...?
    Grüße von der Südlichen Weinstraße
    Jürgen

    "Was nützt es dem Menschen wenn er Lesen und Schreiben gelernt hat, aber das Denken anderen überlässt"
    Ernst Reinhold Hauschka

    Auf Arbeitsplatte: SuSE 11.1 Kernel 2.6.27.7-9-pae ,KDE4.13, i586

    Testplatte: openSUSE 11.1
    2.6.27.7-9-default, KDE4.2, x86_64

    AMD 64x2 4600+; Asus A8N32-SLI; ATI X1900 GT;
    Technisat SkyStar2, 2GB RAM, Netgear WPN311 mit Atheros AR5212/AR5213, Canon IP5000

  5. #5
    mischu62
    Gast

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    guten Abend,

    so,ich versuche es nun nochmal im ruhigen,war auch bissel aufgebracht.
    1.aktuellenkernel mußte ich downgraden auf 2.6.25.16-0.1-pae wegen meiner nvidia-treiber installation.

    -ich habe nun das paket Compat-wireless-kmp-pae20080909-2.6.25.16-0.rm.0.i586.rpm installiert(mit yast)

    2.habe ich folgende pakete nachinstalliert mit yast: smpppd und kinternet

    3.hab ich den Dienst "smpppd" über YaST => System => Runlevel-Editor aktiviert

    4.im yast kontrollcenter/Netzwerkgeräte/Netzwerkeinstellungen den namen meines funknetzes,den Schlüssel und WPA+WPA2 eingestellt

    den rechner neu gestartet,die Wlankarte wird aber in den netzwerkeinstellungen als nicht aktiviert angezeigt.

    Mehr Infos kann ich nicht geben und nun weiß ich auch nicht weiter.

    Micha
    Geändert von mischu62 (18.10.2008 um 18:52 Uhr)

  6. #6
    cal
    cal ist offline
    Lehrling Avatar von cal
    Registriert seit
    17.03.2007
    Ort
    nahe Landau in der Pfalz
    Beiträge
    213

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Hallo,
    ok, damit kann man schon mal was anfangen, ein bissel was fehlt aber noch.
    Schau mal hier rein http://www.pc-forum24.de/13622-post7.html und poste mal die fehlenden Angaben, besonders auch
    Code:
    find /lib/modules/ -iname "ath*"
    Grüße von der Südlichen Weinstraße
    Jürgen

    "Was nützt es dem Menschen wenn er Lesen und Schreiben gelernt hat, aber das Denken anderen überlässt"
    Ernst Reinhold Hauschka

    Auf Arbeitsplatte: SuSE 11.1 Kernel 2.6.27.7-9-pae ,KDE4.13, i586

    Testplatte: openSUSE 11.1
    2.6.27.7-9-default, KDE4.2, x86_64

    AMD 64x2 4600+; Asus A8N32-SLI; ATI X1900 GT;
    Technisat SkyStar2, 2GB RAM, Netgear WPN311 mit Atheros AR5212/AR5213, Canon IP5000

  7. #7
    mischu62
    Gast

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Hi,dachte mir schon das da was fehlen muß

    Code:
    mischu@linux-u3r9:~> find /lib/modules/ -iname "ath*"
    /lib/modules/2.6.27-rc7-12-default/kernel/drivers/net/wireless/ath9k
    /lib/modules/2.6.27-rc7-12-default/kernel/drivers/net/wireless/ath9k/ath9k.ko
    /lib/modules/2.6.27-rc7-12-default/kernel/drivers/net/wireless/ath5k
    /lib/modules/2.6.27-rc7-12-default/kernel/drivers/net/wireless/ath5k/ath5k.ko
    /lib/modules/2.6.25.16-0.1-pae/kernel/drivers/net/wireless/ath5k
    /lib/modules/2.6.25.16-0.1-pae/kernel/drivers/net/wireless/ath5k/ath5k.ko
    /lib/modules/2.6.25.16-0.1-pae/updates/drivers/net/wireless/ath9k
    /lib/modules/2.6.25.16-0.1-pae/updates/drivers/net/wireless/ath9k/ath9k.ko
    /lib/modules/2.6.25.16-0.1-pae/updates/drivers/net/wireless/ath5k
    /lib/modules/2.6.25.16-0.1-pae/updates/drivers/net/wireless/ath5k/ath5k.ko
    mischu@linux-u3r9:~>
    Code:
    mischu@linux-u3r9:~> uname -a
    Linux linux-u3r9 2.6.25.16-0.1-pae #1 SMP 2008-08-21 00:34:25 +0200 i686 athlon i386 GNU/Linux
    mischu@linux-u3r9:~>
    
    
    mischu@linux-u3r9:~> cat /etc/SuSE-release
    openSUSE 11.0 (i586)
    VERSION = 11.0

    Code:
    mischu@linux-u3r9:~> /sbin/lspci #Bei fest eingebauten und PCMCIA-Karten
    00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
    00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
    00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
    00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a
    2)
    00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a
    2)
    00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a
    2)
    00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a
    2)
    00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
    00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
    00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
    00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
    00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
    00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:12.0 VGA compatible controller: nVidia Corporation GeForce 7000M (rev a2) (r                      ev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTr                      ansport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address                       Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Co                      ntroller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscell                      aneous Control
    01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapt                      er (rev 22)
    01:04.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (r                      ev 12)
    01:04.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    05:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wirel                      ess PCI Express Adapter (rev 01)
    mischu@linux-u3r9:~>
    Code:
    mischu@linux-u3r9:~> /usr/sbin/hwinfo --wlan
    01: PCI 500.0: 0282 WLAN controller
      [Created at pci.310]
      UDI: /org/freedesktop/Hal/devices/pci_168c_1c
      Unique ID: y9sn.+sOwF2YnDED
      Parent ID: qnJ_.iXEd68VX6l3
      SysFS ID: /devices/pci0000:00/0000:00:0d.0/0000:05:00.0
      SysFS BusID: 0000:05:00.0
      Hardware Class: network
      Model: "Atheros AR242x 802.11abg Wireless PCI Express Adapter"
      Vendor: pci 0x168c "Atheros Communications, Inc."
      Device: pci 0x001c "AR242x 802.11abg Wireless PCI Express Adapter"
      SubVendor: pci 0x1468 "AMBIT Microsystem Corp."
      SubDevice: pci 0x0428
      Revision: 0x01
      Driver: "ath5k_pci"
      Driver Modules: "ath5k"
      Device File: wlan0
      Features: WLAN
      Memory Range: 0xf2200000-0xf220ffff (rw,non-prefetchable)
      IRQ: 19 (no events)
      HW Address: 00:1c:26:90:8f:02
      Link detected: yes
      WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
      WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462
      WLAN encryption modes: WEP40 WEP104 TKIP CCMP
      WLAN authentication modes: open sharedkey wpa-psk wpa-eap
      Module Alias: "pci:v0000168Cd0000001Csv00001468sd00000428bc02sc00i00"
      Driver Info #0:
        Driver Status: ath5k is active
        Driver Activation Cmd: "modprobe ath5k"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #11 (PCI bridge)
    mischu@linux-u3r9:~>
    Code:
    mischu@linux-u3r9:~> sudo grep -i radio /var/log/messages
    root's password:
    Oct 18 20:29:51 linux-u3r9 sudo:   mischu : TTY=pts/1 ; PWD=/home/mischu ; USER=root ; COMMAND=/usr/bin/grep -i radio /var/log/messages
    mischu@linux-u3r9:~> dmesg|grep -i firmware
    mischu@linux-u3r9:~> ls -ls /lib/firmware
    insgesamt 60
    4 drwxr-xr-x 12 root root 4096 18. Okt 10:08 2.6.27-rc7-12-default
    4 -rw-r--r--  1 root root  137 22. Mai 06:34 3CCFEM556.cis
    4 -rw-r--r--  1 root root  134 22. Mai 06:34 3CXEM556.cis
    4 -rw-r--r--  1 root root  109 22. Mai 06:34 COMpad2.cis
    4 -rw-r--r--  1 root root   76 22. Mai 06:34 COMpad4.cis
    4 -rw-r--r--  1 root root  136 22. Mai 06:34 DP83903.cis
    4 -rw-r--r--  1 root root   53 22. Mai 06:34 E-CARD.cis
    4 -rw-r--r--  1 root root  253 22. Mai 06:34 LA-PCM.cis
    4 -rw-r--r--  1 root root  107 22. Mai 06:34 MT5634ZLX.cis
    4 -rw-r--r--  1 root root   54 22. Mai 06:34 NE2K.cis
    4 -rw-r--r--  1 root root  210 22. Mai 06:34 PCMLM28.cis
    4 -rw-r--r--  1 root root   68 22. Mai 06:34 PE-200.cis
    4 -rw-r--r--  1 root root   74 22. Mai 06:34 PE520.cis
    4 -rw-r--r--  1 root root   86 22. Mai 06:34 RS-COM-2P.cis
    4 -rw-r--r--  1 root root   85 22. Mai 06:34 tamarack.cis
    mischu@linux-u3r9:~>

    Ohje,nun hab ich dich mit ner Unmenge von Daten zugemüllt-brauchst du noch weitere ausgaben von den im Post angeratenen ?

    Micha

    P.S. so,ich hab schon eckige augen und bin gesundheitlich auch noch ned so fit,also ab ins bett.
    Ich mache morgen wider weiter.

    Danke erstmal

    Micha
    Geändert von mischu62 (18.10.2008 um 19:43 Uhr)

  8. #8
    cal
    cal ist offline
    Lehrling Avatar von cal
    Registriert seit
    17.03.2007
    Ort
    nahe Landau in der Pfalz
    Beiträge
    213

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Jow, leider ist der Rest auch noch erforderlich. Die bisherigen Daten geben mir noch keinen konkreten Hinweis wo bei dir der Hund begraben liegt.
    Grüße von der Südlichen Weinstraße
    Jürgen

    "Was nützt es dem Menschen wenn er Lesen und Schreiben gelernt hat, aber das Denken anderen überlässt"
    Ernst Reinhold Hauschka

    Auf Arbeitsplatte: SuSE 11.1 Kernel 2.6.27.7-9-pae ,KDE4.13, i586

    Testplatte: openSUSE 11.1
    2.6.27.7-9-default, KDE4.2, x86_64

    AMD 64x2 4600+; Asus A8N32-SLI; ATI X1900 GT;
    Technisat SkyStar2, 2GB RAM, Netgear WPN311 mit Atheros AR5212/AR5213, Canon IP5000

  9. #9
    mischu62
    Gast

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    So,ich werde noch mal alle textausgaben aus der Konsole in einer einzigen Datei posten-der besseren Übersicht halber so editiert,das nach jeder Ausgabe ein absatz ist.
    Ich hoffe,das ihr mir dann anhand dieser Angaben vielleicht weiterhelfen könnt.

    Code:
     mischu@linux-u3r9:~> uname -a
    Linux linux-u3r9 2.6.25.16-0.1-pae #1 SMP 2008-08-21 00:34:25 +0200 i686 athlon
    i386 GNU/Linux
    
    
    mischu@linux-u3r9:~> cat /etc/SuSE-release
    openSUSE 11.0 (i586)
    VERSION = 11.0
    
    
    mischu@linux-u3r9:~> /sbin/lspci
    00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
    00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
    00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
    00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2
    )
    00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2
    )
    00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2
    )
    00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2
    )
    00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
    00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
    00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
    00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
    00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
    00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:12.0 VGA compatible controller: nVidia Corporation GeForce 7000M (rev a2) (re
    v a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra
    nsport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
    Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con
    troller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella
    neous Control
    01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapte
    r (rev 22)
    01:04.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    01:04.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (re
    v 12)
    01:04.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
    05:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wirele
    ss PCI Express Adapter (rev 01)
    
    
    mischu@linux-u3r9:~> /usr/sbin/hwinfo --wlan
    
    
    mischu@linux-u3r9:~> sudo grep -i radio /var/log/messages
    root's password:
    Oct 18 20:29:51 linux-u3r9 sudo:   mischu : TTY=pts/1 ; PWD=/home/mischu ; USER=
    root ; COMMAND=/usr/bin/grep -i radio /var/log/messages
    Oct 19 09:28:30 linux-u3r9 sudo:   mischu : TTY=pts/1 ; PWD=/home/mischu ; USER=
    root ; COMMAND=/usr/bin/grep -i radio /var/log/messages
    Oct 19 09:39:11 linux-u3r9 sudo:   mischu : TTY=pts/1 ; PWD=/home/mischu ; USER=
    root ; COMMAND=/usr/bin/grep -i radio /var/log/messages
    mischu@linux-u3r9:~> sudo grep -i firmware /var/log/messages
    Oct 19 09:39:35 linux-u3r9 sudo:   mischu : TTY=pts/1 ; PWD=/home/mischu ; USER=
    root ; COMMAND=/usr/bin/grep -i firmware /var/log/messages
    mischu@linux-u3r9:~>
    
    mischu@linux-u3r9:~> dmesg|grep -i firmware
    
    mischu@linux-u3r9:~> ls -ls /lib/firmware
    insgesamt 60
    4 drwxr-xr-x 12 root root 4096 18. Okt 10:08 2.6.27-rc7-12-default
    4 -rw-r--r--  1 root root  137 22. Mai 06:34 3CCFEM556.cis
    4 -rw-r--r--  1 root root  134 22. Mai 06:34 3CXEM556.cis
    4 -rw-r--r--  1 root root  109 22. Mai 06:34 COMpad2.cis
    4 -rw-r--r--  1 root root   76 22. Mai 06:34 COMpad4.cis
    4 -rw-r--r--  1 root root  136 22. Mai 06:34 DP83903.cis
    4 -rw-r--r--  1 root root   53 22. Mai 06:34 E-CARD.cis
    4 -rw-r--r--  1 root root  253 22. Mai 06:34 LA-PCM.cis
    4 -rw-r--r--  1 root root  107 22. Mai 06:34 MT5634ZLX.cis
    4 -rw-r--r--  1 root root   54 22. Mai 06:34 NE2K.cis
    4 -rw-r--r--  1 root root  210 22. Mai 06:34 PCMLM28.cis
    4 -rw-r--r--  1 root root   68 22. Mai 06:34 PE-200.cis
    4 -rw-r--r--  1 root root   74 22. Mai 06:34 PE520.cis
    4 -rw-r--r--  1 root root   86 22. Mai 06:34 RS-COM-2P.cis
    4 -rw-r--r--  1 root root   85 22. Mai 06:34 tamarack.cis
    
    
    mischu@linux-u3r9:~> rpm -q kinternet
    kinternet-0.75-253.1
    
    
    
    mischu@linux-u3r9:~> /usr/sbin/rcsmpppd status
    Checking for SMPPPD:                                                 running
    
    
    mischu@linux-u3r9:~> rpm -q wpa_supplicant
    wpa_supplicant-0.5.10-37.1

  10. #10
    mischu62
    Gast

    Standard AW: Hilfe bei Wlan für Atheros AR242x802.11abg benötigt

    Hier der rest der ausgabe.

    Code:
    mischu@linux-u3r9:~> /sbin/ifconfig
    eth0      Link encap:Ethernet  Hardware Adresse 00:1B:38:51:B9:89
              inet Adresse:192.168.178.33  Bcast:192.168.178.255  Maske:255.255.255.
    0
              inet6 Adresse: fe80::21b:38ff:fe51:b989/64 Gültigkeitsbereich:Verbindu
    ng
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:224 errors:0 dropped:0 overruns:0 frame:0
              TX packets:295 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 Sendewarteschlangenlänge:1000
              RX bytes:108723 (106.1 Kb)  TX bytes:114000 (111.3 Kb)
              Interrupt:220 Basisadresse:0x2000
    
    lo        Link encap:Lokale Schleife
              inet Adresse:127.0.0.1  Maske:255.0.0.0
              inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:42 errors:0 dropped:0 overruns:0 frame:0
              TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 Sendewarteschlangenlänge:0
              RX bytes:2636 (2.5 Kb)  TX bytes:2636 (2.5 Kb)
    
    
    
    mischu@linux-u3r9:~> /sbin/ip a
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
        inet 127.0.0.2/8 brd 127.255.255.255 scope host secondary lo
        inet6 ::1/128 scope host
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
        link/ether 00:1b:38:51:b9:89 brd ff:ff:ff:ff:ff:ff
        inet 192.168.178.33/24 brd 192.168.178.255 scope global eth0
        inet6 fe80::21b:38ff:fe51:b989/64 scope link
           valid_lft forever preferred_lft forever
    
    
    mischu@linux-u3r9:~> /usr/sbin/iwconfig
    lo        no wireless extensions.
    
    eth0      no wireless extensions.
    
    
    mischu@linux-u3r9:~> cat /etc/resolv.conf
    
    # generated by NetworkManager, do not edit!
    
    nameserver 192.168.178.1
    
    
    mischu@linux-u3r9:~> /sbin/route -n
    Kernel IP Routentabelle
    Ziel            Router          Genmask         Flags Metric Ref    Use Iface
    192.168.178.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
    127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
    0.0.0.0         192.168.178.1   0.0.0.0         UG    0      0        0 eth0
    
    
    mischu@linux-u3r9:~> ping -c1 195.135.220.3
    PING 195.135.220.3 (195.135.220.3) 56(84) bytes of data.
    64 bytes from 195.135.220.3: icmp_seq=1 ttl=56 time=66.1 ms
    
    --- 195.135.220.3 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 66.136/66.136/66.136/0.000 ms
    
    
    mischu@linux-u3r9:~> ping -c1 suse.de
    PING suse.de (195.135.220.3) 56(84) bytes of data.
    64 bytes from turing.suse.de (195.135.220.3): icmp_seq=1 ttl=56 time=66.1 ms
    
    --- suse.de ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 66.149/66.149/66.149/0.000 ms
    
    
    mischu@linux-u3r9:~> grep -i persistent /etc/sysconfig/network/config
    
    mischu@linux-u3r9:~> egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*persistent-net*
    /etc/udev/rules.d/70-persistent-net.rules:# This file was automatically generate
    d by the /lib/udev/write_net_rules
    /etc/udev/rules.d/70-persistent-net.rules:# program run by the persistent-net-ge
    nerator.rules rules file.
    /etc/udev/rules.d/70-persistent-net.rules:# PCI device 0x10de:0x054c (forcedeth)
    /etc/udev/rules.d/70-persistent-net.rules:# This file was automatically generate
    d by the /lib/udev/write_net_rules
    /etc/udev/rules.d/70-persistent-net.rules:# program run by the persistent-net-ge
    nerator.rules rules file.
    /etc/udev/rules.d/70-persistent-net.rules:# PCI device 0x10de:0x054c (forcedeth)
    /etc/udev/rules.d/70-persistent-net.rules:# PCI device 0x168c:0x001c (ath5k_pci)
    /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVE
    RS=="?*", ATTR{address}=="00:1c:26:90:8f:02", ATTR{type}=="1", KERNEL=="wlan*",
    NAME="wlan0"
    /etc/udev/rules.d/70-persistent-net.rules:SUBSYSTEM=="net", ACTION=="add", DRIVE
    RS=="?*", ATTR{address}=="00:1b:38:51:b9:89", ATTR{type}=="1", KERNEL=="eth*", N
    AME="eth0"
    /etc/udev/rules.d/75-persistent-net-generator.rules:# these rules generate rules
     for persistent network device naming
    /etc/udev/rules.d/75-persistent-net-generator.rules:#   COMMENT               co
    mment to add to the generated rule
    /etc/udev/rules.d/75-persistent-net-generator.rules:ACTION!="add", GOTO="persist
    ent_net_generator_end"
    /etc/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEM!="net", GOTO="pers
    istent_net_generator_end"
    /etc/udev/rules.d/75-persistent-net-generator.rules:NAME=="?*", GOTO="persistent
    _net_generator_end"
    /etc/udev/rules.d/75-persistent-net-generator.rules:KERNEL!="eth*|ath*|wlan*[0-9                                                                             ]|ra*|sta*|ctc*|lcs*|hsi*", GOTO="persistent_net_generator_end"
    /etc/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="xen", GOTO="per                                                                             sistent_net_generator_end"
    /etc/udev/rules.d/75-persistent-net-generator.rules:# build comment line for gen                                                                             erated rule:
    /etc/udev/rules.d/75-persistent-net-generator.rules:# ibmveth likes to use "loca                                                                             lly administered" MAC addresses
    /etc/udev/rules.d/75-persistent-net-generator.rules:DRIVERS=="ibmveth", ENV{MATC                                                                             HADDR}="$attr{address}", ENV{COMMENT}="ibmveth device ($id)"
    /etc/udev/rules.d/75-persistent-net-generator.rules:ENV{MATCHADDR}=="", ENV{MATC                                                                             HID}=="", ENV{INTERFACE_NAME}=="", GOTO="persistent_net_generator_end"
    /etc/udev/rules.d/75-persistent-net-generator.rules:DRIVERS=="?*", IMPORT{progra                                                                             m}="write_net_rules"
    /etc/udev/rules.d/75-persistent-net-generator.rules:LABEL="persistent_net_genera                                                                             tor_end"
    mischu@linux-u3r9:~> egrep -r '(eth|ath|wlan|ra)([0-9]|10)' /etc/modprobe.*|egre                                                                             p -v '#|blacklist'
    /etc/modprobe.conf:install eth0             /bin/true
    /etc/modprobe.conf:install eth1             /bin/true
    mischu@linux-u3r9:~>
    Hoffe,alles zusammengesammelt zu haben,wenn nicht,sagt mir bitte was fehlt und wie ich die Angaben dann finden kann welche ihr noch benötigt.

    danke,micha
    Geändert von benne (19.10.2008 um 09:43 Uhr) Grund: Typo beim Setzen der Code-Tags behoben

Thema geschlossen
Seite 1 von 3 1 2 3 LetzteLetzte

Aktive Benutzer

Aktive Benutzer

Aktive Benutzer in diesem Thema: 1 (Registrierte Benutzer: 0, Gäste: 1)

     

Ähnliche Themen

  1. Antworten: 1
    Letzter Beitrag: 02.03.2009, 20:18
  2. Wireless Mode stellt sich von "managed" zu "Ad-Hoc" um. (SuSE 10.1)
    Von Bleibtreu im Forum SuSE Internetkonfiguration
    Antworten: 2
    Letzter Beitrag: 27.10.2006, 19:39
  3. Antworten: 3
    Letzter Beitrag: 31.08.2006, 20:29
  4. Antworten: 0
    Letzter Beitrag: 19.06.2006, 22:30

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87