Hier jetzt ein Bischen Code.
Code:
cat /etc/SuSE-release
openSUSE 10.2 (i586)
VERSION = 10.2
Die Ausgabe von hwinfo (gekürzt)
Code:
66: None 00.0: 10701 Ethernet
[Created at net.118]
UDI: /org/freedesktop/Hal/devices/net_00_10_5a_bd_46_d5
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.Er3ucFQoZE2
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:0a.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "3c59x"
Driver Modules: "3c59x"
Device File: eth0
HW Address: 00:10:5a:bd:46:d5
Link detected: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (Ethernet controller)
67: None 00.0: 10780 Network Interface
[Created at net.118]
Unique ID: fCWB.GSopYcFr9cF
SysFS ID: /class/net/dsl0
Hardware Class: network interface
Model: "Network Interface"
Device File: dsl0
Config Status: cfg=new, avail=yes, need=no, active=unknown
Code:
/sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:0d.0 USB Controller: NEC Corporation USB (rev 43)
00:0d.1 USB Controller: NEC Corporation USB (rev 43)
00:0d.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 30)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary)
Code:
ifconfig -a
dsl0 Protokoll:Punkt-zu-Punkt Verbindung
inet Adresse:78.53.153.218 P-z-P:213.191.64.121 Maske:255.255.255.255
UP PUNKTZUPUNKT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:3288 errors:0 dropped:0 overruns:0 frame:0
TX packets:3106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:3
RX bytes:2263644 (2.1 Mb) TX bytes:426716 (416.7 Kb)
eth0 Protokoll:Ethernet Hardware Adresse 00:10:5A:BD:46:D5
inet Adresse:10.11.12.245 Bcast:10.11.12.255 Maske:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
RX packets:10599 errors:612 dropped:0 overruns:0 frame:612
TX packets:6483 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:9543090 (9.1 Mb) TX bytes:768191 (750.1 Kb)
Interrupt:5
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1414 errors:0 dropped:0 overruns:0 frame:0
TX packets:1414 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 Sendewarteschlangenlänge:0
RX bytes:142183 (138.8 Kb) TX bytes:142183 (138.8 Kb) Code:
rpm -qa | grep -i firefox
MozillaFirefox-translations-2.0.0.5-1.1
beagle-firefox-0.2.12-28
MozillaFirefox-2.0.0.5-1.1
Code:
cat /etc/sysconfig/hardware/hwcfg-bus*
MODULE='3c59x'
MODULE_OPTIONS=''
STARTMODE='auto'
Code:
grep -i persistent /etc/sysconfig/network/config
# Forces all interfaces eth* ath* wlan* and ra* to be persistent via udev.
# See /usr/share/doc/packages/sysconfig/README.Persistent_Interface_Names for
FORCE_PERSISTENT_NAMES="yes"
Code:
egrep 'eth|ath|wlan|ra' /etc/udev/rules.d/*net_persistent*
/etc/udev/rules.d/30-net_persistent_names.rules:# This rules are autogenerated from /lib/udev/rename_netiface.
/etc/udev/rules.d/30-net_persistent_names.rules:# generation. Only if all interfaces get a rule the renaming will work
/etc/udev/rules.d/30-net_persistent_names.rules:SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:10:5a:bd:46:d5", IMPORT="/lib/udev/rename_netiface %k eth0"
/etc/udev/rules.d/30-net_persistent_names.rules.bak:# This rules are autogenerated from /lib/udev/rename_netiface.
/etc/udev/rules.d/30-net_persistent_names.rules.bak:# generation. Only if all interfaces get a rule the renaming will work
/etc/udev/rules.d/30-net_persistent_names.rules.bak:SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:a1:b0:00:2f:70", IMPORT="/lib/udev/rename_netiface %k eth0"
/etc/udev/rules.d/30-net_persistent_names.rules.bak:SUBSYSTEM=="net", ACTION=="add", SYSFS{address}=="00:10:5a:bd:46:d5", IMPORT="/lib/udev/rename_netiface %k eth1" Code:
cat /etc/resolv.conf
### BEGIN INFO
#
# Modified_by: pppd
# Backup: /etc/resolv.conf.saved.by.pppd.dsl0
# Process: pppd
# Process_id: 3209
# Script: /etc/ppp/ip-up
# Saveto:
# Info: This is a temporary resolv.conf created by service pppd.
# The previous file has been saved and will be restored later.
#
# If you don't like your resolv.conf to be changed, you
# can set MODIFY_{RESOLV,NAMED}_CONF_DYNAMICALLY=no. This
# variables are placed in /etc/sysconfig/network/config.
#
# You can also configure service pppd not to modify it.
#
# If you do not want the pppd to change your nameserver
# settings set MODIFYDNS=no in the config file for
# this provider in /etc/sysconfig/network/providers/
# and ensure that the option usepeerdns is not set
# in /etc/ppp/options.
#
### END INFO
nameserver 213.191.92.82
nameserver 213.191.74.11 Code:
/sbin/route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
213.191.64.121 0.0.0.0 255.255.255.255 UH 0 0 0 dsl0
10.11.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 dsl0
Code:
ping -c1 212.122.42.6
PING 212.122.42.6 (212.122.42.6) 56(84) bytes of data.
--- 212.122.42.6 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
Code:
ping -c1 root-forum.org
PING root-forum.org (212.122.42.5) 56(84) bytes of data.
64 bytes from mail.ip84.de (212.122.42.5): icmp_seq=1 ttl=56 time=67.2 ms
--- root-forum.org ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 67.255/67.255/67.255/0.000 ms
Code:
/sbin/ip a
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1492 qdisc pfifo_fast qlen 1000
link/ether 00:10:5a:bd:46:d5 brd ff:ff:ff:ff:ff:ff
inet 10.11.12.245/24 brd 10.11.12.255 scope global eth0
3: dsl0: <POINTOPOINT,MULTICAST,NOARP,UP,10000> mtu 1492 qdisc pfifo_fast qlen 3
link/ppp
inet 78.53.153.218 peer 213.191.64.121/32 scope global dsl0 Code:
/usr/sbin/rcsmpppd status
Checking for SMPPPD: running
Code:
rpm -q kinternet
kinternet-0.75-51
Viel Infos, ich hoffe ich habe die richtigen Infos selektiert.
Christian
Ich hab noch vergessen das mein Modem über ein Ethernetkabel
mit meiner Netzwerkkarte verbunden ist.
Christian
LinkBack URL
Über LinkBacks
(Gelöst) Internetkonfiguration fehlerhaft
Lesezeichen