Thema: Zwei Grafikkarten unter Suse 10.3 ?

Hallo ihr,
ich bin gerade von Windos XP zu Suse 10.3 umgestiegen. Jetzt habe ich das Problem, dass ich sowohl eine PCI- als auch eine AGP-Grafikkarte nutze um zwei Monitore gleichzeitig zu betreiben. Linux erkennt aber nur die AGP-Karte. Was kann ich tun um das zu ändern??

Danke schon mal im Voraus für eure Tipps.

Was kann ich tun um das zu ändern?

Erstmal wären mehr Informationen eine gute Grundlage...

Frei nach http://www.pc-forum24.de/sonstige/29...m-problem.html empfehle ich:

Code:

/sbin/lspci 
/usr/sbin/hwinfo --gfxcard

Grüße

Jacko

Zitat von Jacko

Erstmal wären mehr Informationen eine gute Grundlage...

Frei nach http://www.pc-forum24.de/sonstige/29...m-problem.html empfehle ich:

Code:

/sbin/lspci 
/usr/sbin/hwinfo --gfxcard

Grüße

Jacko

Erstmal wären mehr Informationen eine gute Grundlage...
Ich hab alles an infos dazugegeben was ich finden konnte.

Hier noch ein paar infos:

Code:

basti@basti-...:~> /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 VGA compatible controller: S3 Inc. 86c968 [Vision 968 VRAM] rev 0
00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)

Code:

basti@basti-...:~> /usr/sbin/hwinfo --gfxcard
17: PCI 0a.0: 0300 VGA compatible controller (VGA)
  [Created at pci.301]
  UDI: /org/freedesktop/Hal/devices/pci_5333_88f0
  Unique ID: bSAa.R_a4_fAAY_5
  SysFS ID: /devices/pci0000:00/0000:00:0a.0
  SysFS BusID: 0000:00:0a.0
  Hardware Class: graphics card
  Model: "S3 86c968 [Vision 968 VRAM] rev 0"
  Vendor: pci 0x5333 "S3 Inc."
  Device: pci 0x88f0 "86c968 [Vision 968 VRAM] rev 0"
  Memory Range: 0x40000000-0x43ffffff (rw,non-prefetchable,disabled)
  Memory Range: 0x44000000-0x4400ffff (ro,prefetchable,disabled)
  IRQ: 5 (no events)
  Module Alias: "pci:v00005333d000088F0sv00000000sd00000000bc03sc00i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

31: PCI 100.0: 0300 VGA compatible controller (VGA)
  [Created at pci.301]
  UDI: /org/freedesktop/Hal/devices/pci_10de_326
  Unique ID: VCu0.LNnkv7O5L2D
  Parent ID: vSkL.CP+qXDDqow8
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce FX 5500"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0326 "GeForce FX 5500"
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xec000000-0xecffffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable)
  Memory Range: 0xed000000-0xed01ffff (ro,prefetchable,disabled)
  IRQ: 20 (144621 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000326sv00000000sd00000000bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nvidia
  Driver Info #1:
    XFree86 v4 Server Module: nvidia
    3D Support: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #16 (PCI bridge)

Primary display adapter: #31

Mfg a noope.

Da mir gerade ein Rechner mit zwei Grafikkarten fehlt, weiß ich nicht sicher, ob sax2 die Einrichtung einer zweiten Graka unterstützt.

Dies kannst Du aber einfach mit einem

Code:

kdesu sax2

(falls Du KDE User bist) testen.

Geht das nicht, poste bitte zusätzlich zu den anderen Infos:

Code:

grep -i Device /etc/X11/xorg.conf -B 8

Grüße

Jacko

Code:

basti@basti-...:~> grep -i Device /etc/X11/xorg.conf -B 8
 FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
 FontPath "/usr/share/fonts/hellas/misc:unscaled"
 FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
 FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
 FontPath "/usr/share/fonts/hellas/Type1"
 FontPath "/usr/share/fonts/misc/sgi:unscaled"
 FontPath "/usr/share/fonts/xtest"
 FontPath "/opt/kde3/share/fonts"
 InputDevices "/dev/gpmdata"
 InputDevices "/dev/input/mice"
 --
 Load "freetype"
 Load "type1"
 Load "dbe"
 Load "glx"
 Load "extmod"
 Load "vnc"
 EndSection
 
 Section "InputDevice"
 --
 Option "Protocol" "Standard"
 Option "XkbLayout" "de"
 Option "XkbModel" "microsoftpro"
 Option "XkbRules" "xfree86"
 Option "XkbVariant" "nodeadkeys"
 EndSection
 
 
 Section "InputDevice"
 Driver "mouse"
 Identifier "Mouse[1]"
 Option "Buttons" "5"
 Option "Device" "/dev/input/mice"
 Option "Name" "ImPS/2 Generic Wheel Mouse"
 Option "Protocol" "explorerps/2"
 Option "Vendor" "Sysp"
 Option "ZAxisMapping" "4 5"
 EndSection
 
 Section "InputDevice"
 Driver "rfbkeyb"
 Identifier "Keyboard[2]"
 Option "InputFashion" "VNC"
 EndSection
 
 Section "InputDevice"
 --
 SubSection "Display"
 Depth 24
 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
 EndSubSection
 SubSection "Display"
 Depth 8
 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
 EndSubSection
 Device "Device[0]"
 Identifier "Screen[0]"
 Monitor "Monitor[0]"
 EndSection
 
 
 Section "Device"
 BoardName "GeForce FX 5500"
 BusID "1:0:0"
 Driver "nvidia"
 Identifier "Device[0]"
 --
 Screen 0
 VendorName "NVidia"
 EndSection
 
 
 
 Section "ServerLayout"
 Identifier "Layout[all]"
 InputDevice "Keyboard[0]" "CoreKeyboard"
 InputDevice "Mouse[1]" "CorePointer"
 InputDevice "Keyboard[2]" "ExtraKeyboard"
 InputDevice "Mouse[3]" "ExtraPointer"

Grüße
a noope