Thema: (Gelöst) openSUSE 10.2 Einrichtung ipw2100 "klassisch mit ifup" SMPPPD & configs

Hallo,

ich habe bei mir gerade openSuse 10.2 neu aufgespielt, d.h. 10.0 komplett überschrieben.
Es hat auch alles geklappt, bis auf den Internetzugang. Ich gehe mittels wlan-Karte über unseren Router ins Netz. Bis jetzt (Suse 10.0), war das auch völlig problemlos möglich, nur jetzt sagt mir kinternet, dass die Verbindung zum lokalen Server fehlgeschlagen ist und vermutlich der smpppd nicht läuft.

Weiß da jemand Rat?


Gruß
Konstantin

Jo,

SMPPPD einfach einschalten.

=> Yast => System => Runleveleditor.

Greetz,

RM

Danke. Läuft nun.
Internet geht aber dennoch noch nicht.
Wenn ich in der Konsole ifconfig eingebe, dann taucht auch die wlan-karte gar nicht auf, sondern nur eth0 und lo.

Tolle Fehlerbeschreibung

Details?

"Kleines Script ==> Große Hilfe" heisst übrigens der Thread im Unterforum Internetkonfiguration, den Du unbedingt lesen möchtest.

Greetz,

RM

Ein paar Infos über die verwendetet Hardware wäre auch nicht schlecht. Könnte ja sein das einer das selbe hat und weis wie es geht.

herzlichst sb

Ergebnis der Abfrage:

collectNWData.sh: Collecting local network informations ...
##########connect: Network is unreachable
#ping: unknown host SUSE
#####lo no wireless extensions.

irda0 no wireless extensions.

eth0 no wireless extensions.

sit0 no wireless extensions.

#

Code:

collectNWData.sh 0.3.4
Invocation parameters:

*** uname -a
Linux linux-bnei 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386 GNU/Linux

*** cat /etc/SuSE-release
openSUSE 10.2 (i586)
VERSION = 10.2

*** cat /etc/resolv.conf | grep -v "^#" | grep -v "^$"
search site

*** cat /etc/hosts | grep -v "^#" | grep -v "^$" | grep -v "::"
127.0.0.1       localhost
127.0.0.2       linux-bnei.site linux-bnei

*** cat /proc/sys/net/ipv4/ip_forward
0

*** iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

*** route -n
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo

*** ifconfig
eth0      Protokoll:Ethernet  Hardware Adresse 00:0A:E4:26:1E:70
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Basisadresse:0x7000 Speicher:d0200000-d0220000

lo        Protokoll:Lokale Schleife
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:42 errors:0 dropped:0 overruns:0 frame:0
          TX packets:42 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0
          RX bytes:2708 (2.6 Kb)  TX bytes:2708 (2.6 Kb)


*** pingMyLocalIPs
127.0.0.1 : Ping response

*** ping -c1 -W 3 195.135.220.3

*** ping -c1 -W 3 www.suse.de

*** lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
02:00.1 Generic system peripheral [Class 0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
02:01.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller
02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)

*** lsusb
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 005: ID 0727:0306
Bus 002 Device 003: ID 046d:c50b Logitech, Inc. Cordless Desktop Optical
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

*** iptables -L -vn
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination 

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination 

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination 

*** cat /etc/sysconfig/SuSEfirewall2 | grep -v "^#" | grep -v "^$"
FW_DEV_EXT="any"
FW_DEV_INT="eth-id-00:0a:e4:26:1e:70"
FW_DEV_DMZ=""
FW_ROUTE="no"
FW_MASQUERADE="no"
FW_MASQ_DEV="$FW_DEV_EXT"
FW_MASQ_NETS="0/0"
FW_PROTECT_FROM_INT="no"
FW_SERVICES_EXT_TCP=""
FW_SERVICES_EXT_UDP=""
FW_SERVICES_EXT_IP=""
FW_SERVICES_EXT_RPC=""
FW_CONFIGURATIONS_EXT=""
FW_SERVICES_DMZ_TCP=""
FW_SERVICES_DMZ_UDP=""
FW_SERVICES_DMZ_IP=""
FW_SERVICES_DMZ_RPC=""
FW_CONFIGURATIONS_DMZ=""
FW_SERVICES_INT_TCP=""
FW_SERVICES_INT_UDP=""
FW_SERVICES_INT_IP=""
FW_SERVICES_INT_RPC=""
FW_CONFIGURATIONS_INT=""
FW_SERVICES_DROP_EXT=""
FW_SERVICES_REJECT_EXT="0/0,tcp,113"
FW_SERVICES_ACCEPT_EXT=""
FW_TRUSTED_NETS=""
FW_ALLOW_INCOMING_HIGHPORTS_TCP=""
FW_ALLOW_INCOMING_HIGHPORTS_UDP=""
FW_FORWARD=""
FW_FORWARD_MASQ=""
FW_REDIRECT=""
FW_LOG_DROP_CRIT="yes"
FW_LOG_DROP_ALL="no"
FW_LOG_ACCEPT_CRIT="yes"
FW_LOG_ACCEPT_ALL="no"
FW_LOG_LIMIT=""
FW_LOG=""
FW_KERNEL_SECURITY="yes"
FW_STOP_KEEP_ROUTING_STATE="no"
FW_ALLOW_PING_FW="yes"
FW_ALLOW_PING_DMZ="no"
FW_ALLOW_PING_EXT="no"
FW_ALLOW_FW_SOURCEQUENCH=""
FW_ALLOW_FW_BROADCAST_EXT="no"
FW_ALLOW_FW_BROADCAST_INT="no"
FW_ALLOW_FW_BROADCAST_DMZ="no"
FW_IGNORE_FW_BROADCAST_EXT="yes"
FW_IGNORE_FW_BROADCAST_INT="no"
FW_IGNORE_FW_BROADCAST_DMZ="no"
FW_ALLOW_CLASS_ROUTING=""
FW_CUSTOMRULES=""
FW_REJECT=""
FW_REJECT_INT="yes"
FW_HTB_TUNE_DEV=""
FW_IPv6=""
FW_IPv6_REJECT_OUTGOING=""
FW_IPSEC_TRUST="no"
FW_ZONES=""
FW_USE_IPTABLES_BATCH=""
FW_LOAD_MODULES=""
FW_FORWARD_ALWAYS_INOUT_DEV=""
FW_SERVICES_ACCEPT_INT=""
FW_SERVICES_ACCEPT_DMZ=""

*** iwconfig | sed "s/\(Encryption key:\)\([^o][^f][^f][^ ]*\)\(.*\)/\1xx xxx-xxxx-xxxx-xxxx-xxxx-xxxxxxx\3/"

*** catMyConfig
*** cat /etc/sysconfig/network/ifcfg-eth-id-00:0a:e4:26:1e:70
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IFPLUGD_PRIORITY='20'
IPADDR=''
MTU=''
NAME='IBM 82541GI Gigabit Ethernet Controller'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
UNIQUE='rBUF.VMP_4zV+wdE'
USERCONTROL='yes'
_nm_name='bus-pci-0000:02:01.0'

*** cat /etc/sysconfig/network/ifcfg-lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
STARTMODE=onboot
USERCONTROL=no

*** cat /etc/sysconfig/network/ifcfg-wlan-bus-pci-0000:02:02.0
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IFPLUGD_PRIORITY='10'
IPADDR=''
MTU=''
NAME='Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
UNIQUE='LHB6.dkYIOPpnsu8'
USERCONTROL='no'
WIRELESS_AP=''
WIRELESS_AUTH_MODE='open'
WIRELESS_BITRATE='auto'
WIRELESS_CA_CERT=''
WIRELESS_CHANNEL=''
WIRELESS_CLIENT_CERT=''
WIRELESS_CLIENT_KEY=''
WIRELESS_CLIENT_KEY_PASSWORD=''
WIRELESS_DEFAULT_KEY='0'
WIRELESS_EAP_AUTH=''
WIRELESS_EAP_MODE=''
WIRELESS_ESSID='Jever'
WIRELESS_FREQUENCY=''
WIRELESS_KEY=''
WIRELESS_KEY_0=''
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Managed'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_PEAP_VERSION=''
WIRELESS_POWER='yes'
WIRELESS_WPA_ANONID=''
WIRELESS_WPA_IDENTITY=''
WIRELESS_WPA_PASSWORD=''
WIRELESS_WPA_PSK=''
_nm_name='bus-pci-0000:02:02.0'

collectNWData.sh: Local network informations also saved in file collectNWData.out

Hardware:

Intel PRO/Wireless LAN 2100 3B Mini PCI Adapter

Code:

rpm -qa|grep ipw

dmesg|grep ipw

sudo grep -i ipw /var/log/messages

=>posten.

Greetz,

RM

linux-bnei:~ # rpm -qa|greb ipw
bash: greb: command not found
linux-bnei:~ # dmesg|grep ipw
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
ipw2100: eth1: ipw2100_get_firmware failed: -2
ipw2100: eth1: Failed to power on the adapter.
ipw2100: eth1: Failed to start the firmware.
ipw2100Error calling register_netdev.
ipw2100: probe of 0000:02:02.0 failed with error -5
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
ipw2100: eth1: ipw2100_get_firmware failed: -2
ipw2100: eth1: Failed to power on the adapter.
ipw2100: eth1: Failed to start the firmware.
ipw2100Error calling register_netdev.
ipw2100: probe of 0000:02:02.0 failed with error -5
linux-bnei:~ # sudo grep -i ipw /var/log/messages
Dec 27 17:49:12 linux kernel: ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
Dec 27 18:49:12 linux firmware.sh[4838]: Cannot find firmware file 'ipw2100-1.3.fw'
Dec 27 17:49:12 linux kernel: ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
Dec 27 17:49:12 linux kernel: ipw2100: eth1: ipw2100_get_firmware failed: -2
Dec 27 17:49:12 linux kernel: ipw2100: eth1: Failed to power on the adapter.
Dec 27 17:49:12 linux kernel: ipw2100: eth1: Failed to start the firmware.
Dec 27 17:49:12 linux kernel: ipw2100Error calling register_netdev.
Dec 27 17:49:12 linux kernel: ipw2100: probe of 0000:02:02.0 failed with error -5
Dec 27 22:28:32 linux-bnei sudo: root : TTY=pts/1 ; PWD=/root ; USER=root ; COMMAND=/usr/bin/grep -i ipw /var/log/messages

Richtig abtippen musst Du schon!

Code:

linux-bnei:~ # rpm -qa|greb ipw

"grep" heisst der Befehl. Liest Du eigentlich auch, was da ausgespuckt wird? Scheinbar nicht.

Aber der Output hier ist auch EINDEUTIG.

Code:

ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.

=> Paket ipw-firmware nachinstallieren. (Addon CD oder hier )

Greetz,

RM