Thema: (Erledigt/Gelöst) Problem mit LVM Konfiguration

Hallo,

ich had au meinem Server ein LVM bestehend aus 3 Raid1 Verbünden a ~500GB eingerichtet. Beim Anlegen des logischen Volumes hat mir YAST dann auch die ma. Kapazität von 1.3TB angeboten. Formatiert wurden aber nur 1TB

Code:

linux-server:~ # df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sde6             10602480   3127824   6936080  32% /
udev                   1676708       164   1676544   1% /dev
/dev/sde1              7020776    159856   6504280   3% /boot
/dev/mapper/system-share
                     1056894132  40964736 962242308   5% /share

Code:

linux-server:~ # fdisk -l

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000279d3

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       60801   488384001   fd  Linux raid autodetect

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00048d6c

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       60801   488384001   fd  Linux raid autodetect

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0007cb78

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1               1       65271   524289276   fd  Linux raid autodetect
/dev/sdc2           65272      121601   452470725    f  W95 Ext'd (LBA)
/dev/sdc5           65272      121601   452470693+  fd  Linux raid autodetect

Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000a4ca2

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1               1       65271   524289276   fd  Linux raid autodetect
/dev/sdd2           65272      121601   452470725    f  W95 Ext'd (LBA)
/dev/sdd5           65272      121601   452470693+  fd  Linux raid autodetect

Disk /dev/sde: 20.4 GB, 20490559488 bytes
255 heads, 63 sectors/track, 2491 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0007f464

   Device Boot      Start         End      Blocks   Id  System
/dev/sde1   *           1         888     7132828+  83  Linux
/dev/sde2             889        2491    12876097+   f  W95 Ext'd (LBA)
/dev/sde5             889        1150     2104483+  82  Linux swap / Solaris
/dev/sde6            1151        2491    10771551   83  Linux

Disk /dev/md0: 500.1 GB, 500105076736 bytes
2 heads, 4 sectors/track, 122095966 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table

Disk /dev/md1: 463.3 GB, 463329849344 bytes
2 heads, 4 sectors/track, 113117639 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md1 doesn't contain a valid partition table

Disk /dev/md2: 536.8 GB, 536872079360 bytes
2 heads, 4 sectors/track, 131072285 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md2 doesn't contain a valid partition table

Disk /dev/dm-0: 1099.5 GB, 1099511627776 bytes
255 heads, 63 sectors/track, 133674 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000

Disk /dev/dm-0 doesn't contain a valid partition table

Jemand ne Idee wie ich den vollen Platz genutzt bekomme?

Gruß
Arthu

P.S. Suse 11.0

Problem tritt unter 11.1 nicht mehr auf!