Brennen unter Suse 10.1 funktioniert nicht

Status
Für weitere Antworten geschlossen.

Koppi

New Member
Hallo zusammen,

ich versuche erfolglos, meinen Rechner mit Suse 10.1 und der neuesten Version von K3B (K3b 0.12.17) zum Brennen zu bewegen. Der Brenner wird als solcher von K3b erkannt und kann angesteuert werden.

Beim Brennversuch (K3B als root gestartet) erhalte ich nach einiger Zeit jedoch folgende Fehlermeldung:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.1 Level "a"
QT Version: 3.3.5
Kernel: 2.6.16.27-0.6-default
Devices
-----------------------
HP CD-Writer+ 9200 1.0e (/dev/sr0, /dev/sg0) at [CD-R; CD-RW; CD-Rom] [Fehler] [SAO; TAO; RAW; SAO/R96R; RAW/R96R]

LITEON CD-ROM LTN526 YH0G (/dev/hdc, ) at [CD-Rom] [Fehler] [Keine]
K3b
-----------------------
Size of filesystem calculated: 15590

Used versions
-----------------------
cdrecord: 2.1

cdrecord
-----------------------
scsidev: '0,5,0'
scsibus: 0 target: 5 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
/usr/bin/cdrecord: Input/output error. read buffer: scsi sendcmd: retryable error
CDB: 3C 00 00 00 00 00 00 FC 00 00
status: 0x0 (GOOD STATUS)
resid: 64512
cmd finished after 80.040s timeout 40s
/usr/bin/cdrecord: Drive does not support TAO recording.
/usr/bin/cdrecord: Illegal write mode for this drive.
Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugs.opensuse.org/
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
atapi: 0
Device type : Removable CD-ROM
Version : 4
Response Format: 2
Capabilities : SYNC
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 9200 '
Revision : '1.0e'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO
Supported modes: RAW/R96R
Drive buf size : 4183808 = 4085 KB
FIFO size : 4194304 = 4096 KB

cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,5,0 speed=8 -tao -eject -multi -xa -tsize=15590s -

mkisofs
-----------------------
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
15590
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
Using Multiculturalism a recipe for 000.sxw for Schuljahr_0405/E_11d/Klausuren/Multiculturalism a recipe for racism_neu.sxw (Multiculturalism a recipe for racism.sxw)
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 2048*1

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3b3pLkqa.tmp -rational-rock -hide-list /tmp/kde-root/k3b1JM4tb.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-root/k3brdHbDb.tmp -untranslated-filenames -max-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bIC7jfa.tmp

Ich vermute mal, dass das Problem etwas mit den Benutzerrechten zu tun hat, weiß aber nicht, wie ich es lösen kann.

Wer kann mit weiterhelfen??? THANKS!!!
 
Status
Für weitere Antworten geschlossen.
Oben